Peerless Maximizer Products TV Mount ACC 604 User Manual

Installation and Assembly:  
Floor Stand Carriage for Additional Screens  
Model: ACC 604  
ACC 604  
FPZ-600  
Max Load Capacity For Floor Stand With ACC 604:  
Four screens at 200 lb (90.7 kg) each  
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com  
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06  
 
Parts List  
Description  
Qty. Part #  
carriage  
adapter plate  
5/16-24 x 1/4" set screw  
1
2
4
4
4
4
4
4
4
4
4
1
1
201-1020  
A
B
C
D
E
F
G
H
I
201-1022  
520-9566  
510-9554  
520-9262  
520-1128  
520-9402  
510-9109  
504-9012  
504-9020  
590-5005  
560-9716  
560-9646  
A
M6 x 20 mm serrated washer head socket pin screw  
M10 x 15 mm socket head screw  
M6 x 12 mm phillips screw  
M6 x 20 mm phillips screw  
M6 x 30 mm phillips screw  
M4 x 10 mm phillips screw  
M4 x 20 mm phillips screw  
.198" ID x .313" OD x .437" H retaining spacer  
6 mm non-security allen wrench  
4 mm security allen wrench  
B
J
K
L
M
E
C
D
K
L
M
H
I
J
F
G
For customer care call (800) 729-0307 or (708) 865-8870.  
Make sure previously installed carriage and screen(s) are positioned low enough to allow carriage (A) and additional  
screen(s) to be installed. Slide carriage (A) onto main tubes. Slide carriage to desired height and secure using four  
set screws (C) as shown in figure 1 and detail 1. Tighten screws using 4 mm allen wrench (M).  
Note: Orientation of "UP" arrow is critical.  
1
MAIN TUBES  
C
A
DETAIL 1  
fig 1  
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06  
3 of 6  
 
AttachingAdapterPlatetoScreenwithVESA100MountingPattern  
WARNING  
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not  
tightly secured, damage may occur to screen or product may fail.  
Choose hole pattern as shown in figure 2.1. Attach  
adapter plate (B) to back of screen using four M4 x  
10 mm screws (I).  
2
Note: Orientation of "UP" arrow is critical.  
Skip to step 3 on page 6.  
B
I
fig 2.1  
AttachingAdapterPlatetoScreenwithVESA200MountingPattern  
WARNING  
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not  
tightly secured, damage may occur to screen or product may fail.  
Choose hole pattern as shown in figure 2.2. Attach  
adapter plate (B) to back of screen using four M4 x  
10 mm screws (I) as shown.  
2
Note: Orientation of "UP" arrow is critical.  
*Note: If screw (I) gets less than three threads of  
engagement, attach adapter plate (B) to back of  
screen using four M4 x 20 mm screws (J) and four  
spacers (K) as indicated below.  
Skip to step 3 on page 6.  
B
I
*For screens with a  
hole pattern in a  
pocket, spacers (K) go  
between adapter plate  
(B) and screen.  
K
fig 2.2  
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06  
4 of 6  
 
AttachingAdapterPlatetoScreenwithVESA200x200MountingPattern  
WARNING  
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly  
secured, damage may occur to screen or product may fail.  
Choose hole pattern as shown in figure 2.3. Attach  
adapter plate (B) to back of screen using four M6 x  
12 mm screws (F) as shown.  
2
Note: Orientation of "UP" arrow is critical.  
*Note: If screw (F) gets less than three threads of  
engagement, attach adapter plate (B) to back of  
screen using four M6 x 20 mm screws (G). If screw  
(G) still gets less than three threads of engagement,  
use four M6 x 30 mm screws (H).  
B
Skip to step 3 on page 6.  
F
fig 2.3  
AttachingAdapterPlatetoPLPModelAdapterBracket  
For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or call  
customer care for a screen specific adapter bracket (PLP models).  
Note: Refer to PLP model adapter bracket instruction  
sheet for attachment of adapter bracket to screen.  
Choose hole pattern as shown in figure 4.4. Attach  
adapter plate (D) to back of screen using four M10 x  
15 mm screws (E) as shown. Tighten screws using 6  
4
mm allen wrench (L).  
Note: Orientation of "UP" arrow is critical.  
GENERICADAPTER  
BRACKET  
D
E
fig 4.4  
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06  
5 of 6  
 
Hook adapter plate (B) onto carriage (A) and secure using two M6 x 20 mm serrated washer head socket pin screws  
(D) as shown in figure 3 and detail 2. Tighten screws using 4 mm security allen wrench (M).  
3
B
A
D
DETAIL 2  
fig 3  
To install second screen, repeat steps four and five for back side of carriage (A).  
4
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06  
6 of 6  
©2006PeerlessIndustries,Inc.Allrightsreserved.  
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.  
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.  
 

Philips Computer Monitor BDS4222B User Manual
Philips CRT Television TP2785C1 User Manual
Philips Kitchen Utensil 47PFL7603D User Manual
Philips TV Cables SWV6820 10 User Manual
Philips VCR SVA104 User Manual
Pioneer Plumbing Product VSW 1 2 User Manual
Planet Technology Switch SGSW 24040R User Manual
Polaris Offroad Vehicle 7174820 User Manual
Polycom Microphone Vortex User Manual
Pride Mobility Wheelchair J6 2S User Manual