Metrologic Instruments Indoor Furnishings 46 00709 User Manual

Optional Wall/Tabletop Stand (PN 46-00885)

MS9590 STAND INSTALLATION GUIDE

To fix mount the stand to the wall:

1. Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a

horizontal centerline.

Flex Stand Components (PN 46-00709)

2. Install one #8 wood screw in each of the pilot holes, leaving a space

between the head of the screw and the wall surface.

3. Locate the two slots marked as "A" on the stand base in Figure 5.

4. Match the "A" slots on the stand to the heads of the installed wood

screws.

5. Slide the stand over the screw heads and down to lock the stand in place.

Item

Item Description

Qty.

Cradle Coupler

Cradle

Flexible Shaft

Screw Cap

Stand Base

¼" - 20 x ⅜" Flat Head Phillips Screw, 100° Undercut

#8 Round Head Wood Screw (for fixed mount applications)

M3 -.5 x 20 mm, Pan Head Phillips Screw

M3 Flat Washer

Figure 5.

Figure 6.

Cradle Angle Warning

M3 Split Lock Washer

Flexible Shaft Cover

Figure 1. Stand Components

November 2007

Printed in the USA

0 0 - 0 5 2 4 9 B

- 4 -

- 1 -