Manitowoc Ice Ice Maker K00160 User Manual

K00160 ADAPTER KIT  
Installation Instructions  
1. The K00160 kit is used for installing a P-0530 ice machine on a Manitowoc 170, 400, 470 and 570, S and C-Series  
bins.  
2. Installation (bin must be level before starting):  
A. Place adapter on bin, as shown. Using the adapter as a template, drill two 5/32” (4 mm.) holes, .500” (12.7 mm.)  
deep maximum, in the back of the bin. Warning: Do not drill through interior liner. Attach with (2) 10-24 x  
.500” screws provided.  
B. Apply foam tape to the edge of the adapter opening as shown in the (A) position. Note: It is recommended to  
RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking.  
C. Place the ice machine on the adapter. Secure it to the adapter as shown with the (2) machine screws provided.  
3. Refer to ice machine installation manual for ice machine installation procedures.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8011523  
Rev. 07/22/99  
 

Kustom Stereo Amplifier QUAD JR User Manual
Lenovo Tablet S2109A F User Manual
Lindy Network Card 51135 User Manual
Logitech Computer Keyboard MK620 User Manual
Logitech Speaker System Ft User Manual
McCulloch Lawn Mower M19542H User Manual
Memorex VCR MVR4041 User Manual
Metra Electronics PDAs Smartphones 99 8156 User Manual
MicroBoards Technology DVD Recorder HCL Autoloader User Manual
M Systems Flash Disk Pioneers Flash Memory 45 SR 001 01 7L User Manual