Makita Cordless Drill DFO30D User Manual

ECHNICAL INFORMATION  
PRODUCT  
T
P 1/ 4  
Models No.  
Description  
DF030D (FD01*)  
L
10.8V Cordless Driver Drill  
* Model number for North and Central American  
countries except Mexico and Guam  
H
W
CONCEPT AND MAIN APPLICATIONS  
Model DF030D is a 10.8V cordless driver drill compact and lightweight  
for easy handling, but featuring 2-speed gear selection with variable speed  
in each range for a wide range of applications.  
Dimensions: mm (")  
Length (L) 157 (6-3/16)  
Width (W)  
53 (2-1/16)  
Uses new 10.8V Li-ion battery of stick type as a power unit.  
Height (H) 183 (7-1/4)  
This product is available in the following variations.  
Battery  
type  
Plastic  
carrying case  
Housing  
color  
Model No.  
Charger  
Offered to  
quantity  
2
Makita-blue  
white  
Makita-blue  
white  
DF030D  
USA, Canada  
Mexico, Panama  
DF030DW  
DF030DWE  
DF030DWEW  
BL1013  
(Li-ion 1.3Ah)  
DC10WA  
Yes  
All countries except  
the four listed above  
The models also includes the accessories listed below in "Standard equipment".  
Specification  
Type of cell  
Li-ion  
10.8  
Voltage: V  
Battery  
Capacity: Ah  
1.3  
50  
Charging time (approx.): min.  
with DC10WA  
Max. output: W  
115  
0 - 350  
0 - 1,300  
6.35 (1/4) Hex  
10 (3/8)  
Low  
High  
No load speed: min-1 = rpm  
Driving shank: mm (")  
Capacities: mm (")  
Steel  
Wood  
21 (13/16)  
Max. fastening torque:  
N.m (in.lbs)  
Soft joint  
Hard joint  
14 (120)  
24 (210)  
Torque adjustment  
18 stages + drill mode  
0.5 - 3.5 (4 - 30)  
Clutch torque setting: N.m (in.lbs)  
Lock torque: N.m (in.lbs)  
Electric brake  
22 (200)  
Yes  
Variable speed control by trigger  
Mechanical 2-speed  
Yes  
Yes  
Reverse switch  
Yes  
LED job light  
Yes  
Net weight [with battery BL1013]: kg (lbs)  
0.88 (1.9)  
Standard equipment  
Phillips bit 2-50 (double-end) ........ 1 pc (for countries using M-type spindle)  
Phillips bit 2-45 (double-end) ........ 1 pc (for countries using N-type spindle)  
Holster ............................................ 1 pc  
Note: The standard equipment for the tool shown above may differ by country.  
Optional accessories  
Driver bits, Socket bits, Hex shank drill bits for wood, Hex shank drill bits for steel, Bit piece,  
Drill chuck, Charger DC10WA, Battery BL1013  
 
P 2/ 4  
Repair  
CAUTION: Remove the bit and the battery from the machine for safety before  
repair/ maintenance in accordance with the instruction manual!  
[1] NECESSARY REPAIRING TOOLS  
Code No.  
1R291  
Description  
Use for  
Retaining ring S and R pliers  
Removing/ Installing Bit sleeve  
[2] DISASSEMBLY/ASSEMBLY  
[3]-1. DC Motor, Gear Assembly, Speed Change Lever Assembly  
DISASSEMBLING  
Fig. 1  
Set plate  
(2pcs.)  
1) Remove two Set plates with which Handles (L) and (R) are assembled to one  
another as follows:  
Insert a small slotted screwdriver through the punched hole of Set plate and  
move Set plate in the direction of the arrow using the screwdriver. (Fig.1)  
2) Remove Housing (R) from Housing (L) by loosening six Bind PT3x6 tapping  
screws.  
Handle (R)  
3) Remove Speed change lever assembly from Gear assembly. (Fig. 2)  
4) Remove DC motor from Gear assembly as illustrated in Fig. 3  
5) Separate DC motor from Bracket by loosening two M3x6 Pan head screws.  
(Fig. 4)  
small slotted  
screwdriver  
Handle (L)  
Fig. 2  
Speed change lever assembly  
Fig. 3  
Fig. 4  
Shift the change lever of Gear  
assembly to the high speed position.  
M3x6 Pan head screws  
(2pcs.)  
1
change lever of  
Gear assembly  
Motor bracket  
Turn Gear assembly  
counterclockwise.  
2
3 Pull out Gear assembly  
from DC motor with  
Bracket.  
convex portion of  
Motor bracket  
DC motor  
DC motor  
ASSEMBLING  
Fig. 5  
1) Fix Motor bracket to DC motor with two M3x6 Pan head screws.  
Note: Align the red marking on DC motor with non-convex portion of  
Motor bracket. (Fig. 5)  
non-convex portion  
2) Fix Gear assembly to DC motor with bracket and turn Gear assembly  
clockwise.  
Note: Align the change lever of Gear assembly with the red marking on  
DC motor. (Fig. 3)  
red marking on  
terminal of positive  
pole  
3) Fix Speed change lever assembly to the change lever of Gear assembly as  
illustrated in Fig. 2.  
Note: Set the change lever of Gear assembly in place between two  
Compression springs 4 on the reverse side of Speed change lever  
assembly, and insert the emboss of the change lever into one of  
Compression spring 4. (Fig. 6)  
convex portions  
Fig. 6  
change lever of  
Gear assembly  
Viewed from the upper position  
Speed change lever assembly  
Emboss of change lever  
of Gear assembly  
Compression spring 4  
 
P 3/ 4  
Repair  
[2] DISASSEMBLY/ASSEMBLY  
[3]-1. DC Motor, Gear Assembly, Speed Change Lever Assembly (cont.)  
ASSEMBLING  
(4) After installing the assembled parts in place of Housing L, shift Speed change lever assembly to either low speed  
position or high speed position.  
(5) Fixing Housing (R) to Housing (L) with six Bind PT3x16 tapping screws.  
(6) Insert two Set plates in place. (Fig. 1)  
[3]-2. Disassembling Bit Holder of Gear Assembly  
Fig. 7  
Ring spring 10  
(1) While pushing the top of sleeve by your thumb to prevent Compression spring 13  
from popping out from Bit holder, expand Ring spring 10 using 1R291 and raise  
the opposite of the expanded Ring spring 10 by your index finger. (Fig. 7)  
(2) Ring spring 10 can be removed.  
And Flat washer 11, Compression spring 13, Bit sleeve and Steel ball 3 (2pcs.)  
can be removed.  
1R291  
Sleeve  
[3]-3. Assembling Leaf Spring  
Set Leaf spring in place. (Fig. 8)  
Fig. 8  
Note: Do not face the center edge of Leaf spring to Housing L.  
Leaf spring  
center edge  
Housing L  
Fig. 9  
[3]-4. Assembling F/R Change Lever  
Link the notch of F/R change lever and the protrusion of Switch,  
then install them in Housing L. (Fig. 9)  
notch of F/R change lever  
protrusion of Switch  
Circuit diagram  
Fig. D-1  
red marking  
DC motor  
Color index of lead wires' sheath  
M1  
M2  
Black  
Red  
Terminal  
Switch  
White  
LED  
 
P 4/ 4  
Wiring diagram  
Fig. D-2  
Pay attention to the directions of lead wires and connect Flag receptacles  
to electrical parts.  
Refer to the following illustration.  
red marking  
Terminal  
DC motor  
Fig. D-3  
Before installing Switch in Housing R, route Lead wires as illustrated below and connect two Connectors.  
Do not ride their Lead wires on ribs.  
Lead wire holders  
Connector  
(To Switch)  
Connector  
LED  
Lead wires in this area  
must be tight.  
Fig. D-4  
Bend the terminals of DC motor  
as illustrated.  
Route Lead wires between ribs.  
Insert Connectors between  
their Lead wire holders.  
Flag receptacles and  
Lead wires have to  
be far from DC motor.  
Do not ride them  
on the ribs.  
Face the glue-attached portion of LED  
to DC motor side.  
Lead wires holders  
Do not ride Lead wires on their embosses.  
 

Legacy Car Audio Car Stereo System LCD17A User Manual
Lenmar Enterprises Battery Charger PRO32A User Manual
Lexmark Printer Accessories 10N0016 User Manual
LG Electronics Clothes Dryer DLEX3001 User Manual
LG Electronics Computer Monitor IPS226V User Manual
LG Electronics Microwave Oven LMH1017CVB User Manual
Life Fitness Bicycle Lifecycle 9100 User Manual
LOREX Technology Security Camera SG7520 User Manual
Magnadyne Speaker LS3CMW User Manual
Melissa Blood Pressure Monitor 630 013 User Manual