LumiSource Speaker System BS SPYRA User Manual

Assembly Instructions

Instrucciones De Asamblea

Instructions d’Assemblée

Spyra Bar Stool

Part # BS-SPYRA

December 2010

CHARGE

UP/DOWN

SPEED

ON/OFF

HOLD

Instructions

Assembly

1. Remove protective cap from Hydraulic pole (G).

2. Insert Hydraulic pole (G) into Base (H).

3. Place Metal pole (E) over Hydraulic pole (G).

4. Insert LED Mechanism (D) into Metal Pole (E).

5. Place Seat (A) over LED Mechanism (D) and Metal

pole (E) .

6. Secure by placing Screws (B) and Washers (C) into

Seat (A). Fasten Screws (B) and Bolts (F).

7. Carefully sit on Seat (A) to secure.

Operation

1. Charge internal battery using Adaptor (I).

NOTE: Bar stool MUST be turned oﬀ charge.

2. Push SPEED button to regulate color phasing.

3. Push ON/OFF button to turn LEDs on and oﬀ.

4. Push HOLD button to pause LEDs on speciﬁc colors.

3. Adjust height using lever.

Part List

1 Seat with backrest (A)

4 Screws (B)

4 Washers (C)

1 LED Mechanism (D)

1 Metal pole with

footrest (E)

4 Bolts (F)

1 Hydraulic pole (G)

1 Base (H)

1 Adapter (I)

ATTENTION:

This cap must be

removed prior to

assembly!