Lenoxx Electronics CD Player CD 79 User Manual

®
10 SECOND ESP PLUSTM  
ELECTRONIC SHOCK PROTECTION  
PROGRAMMABLE COMPACT DISC PLAYER  
WITH CAR ADAPTOR KIT  
MODEL CD-79  
OPERATING INSTRUCTIONS  
PLAYS ALL MUSIC COMPACT DISCS  
BASS BOOST SYSTEM  
6 DIGIT LCD VISUAL DISPLAY  
TRACK REPEAT & DISC REPEAT  
10 SECOND ESP (ELECTRONIC SHOCK PROTECTION) PLUSTM SYSTEM  
DELUXE STEREO HEADPHONES INCLUDED  
CAR POWER CORD AND CASSETTE ADAPTOR INCLUDED  
AC ADAPTOR INCLUDED  
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)  
AUX OUT JACK - CONNECTS TO YOUR STEREO SYSTEM  
PLEASE READ CAREFULLY BEFORE USE  
CD79(12D-10E2)011240 NL v.1  
 
E
2
LOCATION OF CONTROLS  
5
6
4
7
3
8
9
10  
11  
12  
2
13  
1
14  
15  
16  
1. CD DOOR OPEN BUTTON (slide to open)  
2. CD DOOR  
3. BACKWARD SKIP/SEARCH BUTTON (  
4. PROGRAM BUTTON  
)
5. FORWARD SKIP/SEARCH BUTTON (  
)
6. ESP+ (electronic shock protection) BUTTON  
7. STOP AND POWER OFF BUTTON  
8. REPEAT/RANDOM BUTTON  
9. LCD DISPLAY  
10. PLAY/PAUSE BUTTON  
11. AC ADAPTOR JACK  
12. AUX OUT JACK (for home stereo connection)  
13. VOLUME CONTROL  
14. PHONES JACK (headphones jack)  
15. BATTERY DOOR  
16. BASS BOOST SWITCH  
 
3
POWER SOURCES  
1.Using with Batteries  
Insert two size AA alkaline batteries  
according to the + and - markings in  
the battery compartment.  
TIPS ON BATTERY USE  
Reversing polarities will damage the batteries and possibly your set. Be sure to  
follow polarity ( + and - ) as indicated.  
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),  
or old batteries with new ones.  
When not in use for an extended period of time, or while internal batteries will not  
be used, remove them to prevent possible acid leakage or corrosion resulting in  
damage to your player.  
When the batteries have become discharged, they must be disposed of in a safe  
manner that complies with all applicable laws.  
Installation of batteries should only be done by an adult (for safety).  
ALKALINE BATTERY LIFE  
Bear in mind that battery life expectancy is based upon volume and bass listening  
levels.  
Maximum battery power consumption happens at maximum settings. Typical life  
for 2 size “AA” alkaline batteries is above 8 hours of continuous use.  
WHEN  
FLASHES IN THE DISPLAY  
If the alkaline batteries are weak and discharged, this symbol “  
” flashes in the  
display, then the power automatically turns off. If this occurs, replace the alkaline  
batteries (also if display does not show anything, the batteries are dead).  
NOTE: You may use rechargeable batteries on this set. However, because  
rechargeable batteries generally have lower voltage (1.2 volts instead of  
1.5 volts). Your playing time will be much less than normal fresh alkaline  
batteries.  
 
4
2.Using AC Power  
Your player may be powered from any household 120V AC outlet, using the AC  
adaptor included. Insert the adaptor’s small connector plug into the DC 4.5V Jack  
marked  
on player (on the right side of the set), and plug the adaptor into  
an AC outlet.  
NOTE: If the AC Adaptor is connected, and regular batteries are installed, the  
player automatically switches to the AC Adaptor power and the batteries  
are not used.  
CAUTION:  
To prevent electric shock, do not use this AC Adaptor with an extension cord or  
outlet, unless it can be fully inserted without exposing any part of the blades. Do  
not use any other AC adaptor to power this set or you may damage your set.  
3.Using Cigarette Lighter Adaptor  
Use the cigarette lighter adaptor to supply power to  
Cigarette Lighter  
your player and conserve battery life when using the  
CD player in a car (no batteries are needed).  
Indicator  
Plug the adaptor into the car cigarette lighter. Insert  
firmly, and the cigarette lighter indicator will light up.  
Plug the other end into the DC 4.5V Jack on the right  
of the set.  
If there is no power, your fuse may have blown. To  
change fuse on cigarette lighter adaptor, unscrew  
the tip. Replace only with same 1A 250V fuse.  
CAUTION:  
Use this set only with the supplied cigarette lighter adaptor. Use with other cigarette  
lighter adaptors could damage the set.  
When the inside of the cigarette lighter socket is dirty with ashes, the plug section may  
become hot due to poor contact. Be sure to clean your car cigarette lighter socket  
before use.  
After use, disconnect the cigarette lighter adaptor plugs from both the set and the  
cigarette lighter socket.  
The cigarette lighter adaptor may cause interference with reception to the car radio. If  
this happens, disconnect the cigarette lighter adaptor from the cigarette lighter socket.  
Do not leave the cigarette lighter adaptor plugged in without your car’s motor running,  
your car’s battery may drain in some models of cars that supply power to the cigarette  
lighter plug even with the car’s keys removed.  
 
CASSETTE ADAPTOR  
5
The car cassette adaptor allows you to use your CD player with your car stereo  
cassette system or portable audio cassette system.  
1. Insert the car cassette adaptor in the same direction as you would insert an audio  
cassette tape, with the side marked THIS SIDE UP facing upwards.  
2. If the car cassette adaptor cord is on the wrong side  
of the tape, reposition the cord by following the  
instructions below.  
3. Insert the car cassette adaptor stereo plug into the  
AUX OUT jack on the right of the CD player.  
4. Turn on the cassette player. Press PLAY button on  
the cassette player.  
5. Press PLAY on the CD player.  
6. Adjust the volume on your cassette player.  
TO AUX OUT JACK  
7. When done, leave the cassette player on and first  
eject the adaptor, then turn off cassette player.  
Reposition the cord  
The cord should extend out from the cassette player  
when the cassette is inserted (direction depending  
on your tape player).  
1. To reposition the cord, remove the top plate by  
Fig. 2  
Fig. 1  
removing 2 screws with a dime (see Fig. 1).  
2. Reposition the cord so that it comes out from  
other positions (see Fig. 2).  
Remove two large  
screws with a dime  
or screwdriver  
Move cord to desired  
position (three cord  
positions)  
3. Replace the cover and the screws.  
NOTE: The car cassette adaptor has the play head on one side  
only. If the cassette adaptor keeps ejecting out, or the sound is weak, press  
the REVERSE button on your cassette player to change direction or reverse  
the adaptor.  
CONNECTING TO HOME STEREO SYSTEMS  
The AUX OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the  
cable’s mini plug to the AUX OUT jack on your player, and the other appropriate end  
usually RCA JACKS to the CD/AUX INPUTS of your home stereo.  
YOUR CD PLAYER  
YOUR STEREO  
SYSTEM  
TO AUX OUT JACK  
OPTIONAL CABLE (3.5mm)  
TO RCA JACKS  
TO AUX IN JACKS  
 
CD PLAYING  
6
1 Load the Disc.  
Push  
here  
Disc  
Label side up  
Slide right to open  
2 Connect the Headphones.  
Stereo headphones  
To PHONES jack  
3 Press the PLAY/PAUSE button.  
PLAY/PAUSE  
button  
TOTAL TRACKS TOTAL PLAYING  
TIME ON THE CD  
TRACK NUMBER ELAPSED PLAYING  
CURRENTLY TIME OF THE  
PLAYING CURRENT TRACK  
VOLUME CONTROL  
4 Adjust the Volume.  
 
7
Other Operations  
Operation  
Display window shows  
Press  
PLAY/PAUSE  
button  
To pause play  
TRACK NUMBER  
CURRENTLY PLAYING  
PLAYING TIME  
FLASHES  
To release pause  
and resume play  
PLAY/PAUSE  
button  
TRACK NUMBER  
CURRENTLY PLAYING  
PLAYING TIME  
ADVANCES  
To stop  
STOP button  
TOTAL TRACKS  
TOTAL PLAYING TIME  
STOP button once and wait 30 seconds, or press  
STOP button twice  
To turn off the power  
To skip to the next track(s)  
once (or repeatedly)  
once (or repeatedly)  
To skip to the previous track(s)  
To go ahead at high speed  
(search)  
Keep  
depressed and release when the  
desired music section of the disc is found.  
To go back at high speed  
(search)  
Keep  
depressed and release when the  
desired music section of the disc is found.  
BASS BOOST switch  
This switch enhances the low frequency (bass)  
sounds at low listening levels. Switch this ON or  
OFF to suit your taste.  
BASS BOOST switch  
 
8
REPEAT, INTRO AND RANDOM PLAY  
You may have repeat, intro or random play using the REPEAT/RANDOM button.  
Press the REPEAT/RANDOM button several times, and the display will show the  
followings in turn:  
REPEAT  
1
--> REPEAT ALL --> INTRO --> SHUFF (RANDOM) --> NORMAL PLAY  
Single Track Repeat  
Plays one song over and over till you press STOP.  
During play, select the song you want to repeat with  
X 1  
either of the SEARCH buttons (  
the REPEAT/RANDOM button once, the symbol REPEAT  
appears in the display.  
or  
), then press  
1
REPEAT 1  
The song currently playing will repeat over and over,  
until you press STOP.  
All Tracks Repeat  
Repeats all songs in order, till you press STOP.  
X 2  
During play, press the REPEAT/RANDOM button twice,  
the symbol REPEAT ALL will show in the display.  
All songs will keep playing in sequence 1, 2, 3, etc. and  
when finished, will start all over again until you press the  
STOP button.  
REPEAT ALL  
Intro Play  
This plays the first 10 seconds of songs in sequential  
order.  
1. During play, press the REPEAT/RANDOM button  
three times, the word INTRO will flash in the display.  
2. Press the PLAY button, the word INTRO will stop  
flashing and the first 10 seconds of each song on the  
CD will play in sequential order.  
X 3  
3. When you find a song you like, press the PLAY button,  
normal play will be resumed, that song (and the  
following songs) will play NORMALLY.  
INTRO  
Random Play  
This plays the songs on the disc in a random order.  
1. During play, press REPEAT/RANDOM button four times  
the word SHUFF will flash.  
X 4  
2. Press the PLAY button, this will play all of the songs  
in random order selected by the CD player. The word  
SHUFF will stop flashing.  
SHUFF  
3. Press the SEARCH button  
to skip to the next  
random song.  
 
9
PROGRAM PLAY  
The tracks (songs) on the disc can be programmed (arranged in advance) to play in  
any order you prefer (up to 20 tracks can be programmed).  
Programming Example:  
Program Number  
etc.  
etc.  
1
3
2
5
3
8
4
1
5
2
6
4
7
1
8
1
Track Number (song number)  
During programming, the word PROG flashes in the display. To program songs to play  
in your preferred order, follow steps below:  
1.During play, press the PROGRAM 3.Press the PROGRAM button. Track 3 is  
button.  
now programmed.  
Program #2 will now show in the  
display, ready for your next selection of  
track.  
PROG  
The word PROG will flash in the display.  
4.Repeat steps 2 and 3 to program other  
tracks till you finish (up to 20 selections).  
PROG  
5.After programming is finished, press  
PLAY to begin programmed play.  
PROG changes to be steady on in  
the display, and music begins to play in  
the order you programmed.  
Program number  
2.Press the SEARCH button (  
or  
)
to select track number 3 (example). PROG  
and track number “03” will flash in the  
display.  
NOTE:  
- The player will stop automatically after  
all programmed tracks have been  
played.  
- To quit programmed play, press STOP  
button once. Then you may press PLAY  
button to re-start normal play.  
PROG  
Your programming will be lost:  
When the alkaline batteries are  
exhausted or removed, or the AC  
ADAPTOR is disconnected.  
Track number  
When the power is shut off or the CD  
DOOR is opened.  
 
10 SECOND ESP PLUSTM SYSTEM  
10  
This set is designed with 10 second ESP (Electronic Shock Protection) PLUSTM - which  
allows virtually unlimited gentle skip protection, and 10 second normal shock protection.  
The ESP PLUSTM function prevents the sound from skipping by using a buffer memory  
that stores music data. The new ESP PLUSTM system can store more music than  
normal anti-skip systems.  
This new design allows gentle swaying of the set without music skipping as in walking.  
This set will not work during jogging.  
Press the ESP+ button to turn on the ESP PLUSTM system. Press  
it again to turn it off.  
When the ESP PLUSTM function is switched ON or OFF during  
play, the sound will be interrupted for a few seconds. This is  
normal.  
When the ESP+ button is pressed during play, the “  
” (memory  
basket) indicator will appear in the display, the digital data  
equivalent to approximately 10 seconds of music is stored in the  
“read-ahead” memory buffer before it is decoded and played.  
EMPTY MEMORY  
The “ ” mark changes to the “  
memory buffer (basket) is full.  
” mark, indicating that the  
When the set is subject to a shock or a bump during play, the  
data stored in memory continues to be decoded and played.  
This gives the pickup time to stabilize and continue reading  
new music. As the data is used from memory, the indicator  
FULL MEMORY  
changes from “ ” to “  
original position, new data is stored in memory and the display  
changes back to the “ ” mark.  
If the set is subject to repeated shocks and all the data stored  
in memory is used up, the “ ” mark is displayed and the  
”. Once the pickup returns to its  
SOME MEMORY USED  
sound will skip or stop for a brief period until the memory basket  
has time to fill up again.  
To turn off the 10 second ESP PLUSTM function, press the ESP+  
button again.  
Keep the digital ESP PLUSTM function off when using the set in ALL MEMORY USED UP  
a stable, no vibration area, where it will not receive shocks.  
The batteries will last longer when the ESP function is off.  
NOTE:  
- The music may stop if the player receives continuous shocking.  
- You may hear noise or skipping if the CD is dirty or scratched.  
- If during ESP play, you press PLAY/PAUSE, or SEARCH buttons,  
the memory basket will empty itself temporarily.  
 
11  
MAINTENANCE  
Handling Compact Discs  
Cleaning the lens  
Dirty, scratched or warped discs may  
cause skipping or noise.  
A dirty lens will cause sound skipping. If  
the lens is very dirty, the player may not  
work. We suggest using a special cleaning  
disk (not included) available in most music  
and Hi-Fi stores. However, if you do not  
have one, you may use a cotton swab  
very slightly dampened with alcohol to  
clean the lens.  
Handle the disc only by the edges. To  
keep clean, do not touch its surface.  
Discs should be stored in their cases  
after use to avoid scratches.  
Do not expose discs to direct sunlight,  
high humidity, high temperatures, or  
dust, etc. Prolonged exposure to  
extreme temperatures can warp the disc  
(such as leaving the discs in your car  
during summertime).  
Cleaning the cabinet  
Wipe with a soft cloth. If the cabinet is  
very dirty, dampen (not dripping wet) the  
cloth with a weak solution of soapy water,  
and then wipe clean.  
Do not stick or write anything on either  
side of disc. Sharp writing instruments, or  
the inks used in some felt-tip pens, may  
damage its surface.  
Cleaning the Discs  
To remove the Disc  
Fingerprints should be carefully wiped  
Open the CD DOOR by sliding the DOOR  
OPEN button, hold the disc by the edge  
while slightly pressing on the center  
spindle as illustrated, then lift it from the  
edge to release and remove.  
from the surface of disc with a soft cloth.  
Unlike conventional records, compact  
discs have no grooves to collect dust  
and microscopic dirt, so gently wiping  
them with a soft cloth should remove  
most particles. Wipe in a straight  
motion from the center to the edge.  
NOTE  
Always press the STOP button and wait  
for the disc to stop rotating before sliding  
the DOOR OPEN button to remove the  
disc.  
Never use thinner, benzine, record  
cleaner or antistatic spray on a compact  
disc. Such chemicals can damage its  
plastic surface.  
 
12  
SAFETY PRECAUTIONS  
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer  
servicing to qualified service personnel only.  
Do not insert pins or coins, clips, or any objects inside the set.  
This set is equipped with a safety device which automatically turns the laser beam off  
when the CD door is opened.  
Do not drop the set or subject it to strong shocks. Doing so could result in damage.  
Do not place the set in locations where the temperature is high, or in humid or dusty  
locations, or locations with long heavy vibrations, or tilted surfaces.  
The set’s cabinet may warp or the set may be damaged if it is placed in direct sunlight,  
near heaters (where the temperature is 1400F/600C or higher) or in cars with the  
windows closed. In the summer, the temperature may get as high as 2120F/1000C or  
more.  
Use the set within a temperature range of 410F/50C to 950F/350C.  
Use ONLY the AC Adaptor provided, others may damage your set. Disconnect the  
Adaptor from the wall outlet when the set is not to be used for an extended period of  
time (3 days or more).  
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially  
available cleaners, as they may damage or discolor the finish.  
Do not wear headphones while operating a motor vehicle. This could create a traffic  
hazard and is illegal in many areas. Do not use this set when bicycling or running.  
The headphones supplied with your set provide superb stereo listening while allowing  
you to hear some outside sounds when listening at normally low volume levels. Listening  
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the  
interest of safety, it is strongly advised against the use while engaging in activities  
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be  
hazardous. Also loud volume can hurt your ears. If you notice that the sound has  
become weak or distorted or if tracks do not change, this is an indication that your  
batteries are weak. Replace both batteries at the same time (see Using with Batteries).  
Your CD-79 is identified by a serial number located in the Battery Compartment. Record  
this number in the space provided below.  
Model CD-79 Serial No.  
Date Purchased:  
This manual contains detailed information on its safety and use. Please read it carefully  
so that you may take full advantage of its many features, and ensure a safe reliable  
operation. Keep this manual for future reference.  
CONDENSATION  
If cold water is poured into a glass, water droplets form on the outside of the glass.  
This is called condensation. Condensation may occur on internal operating parts of the  
lens.  
Condensation occurs:  
When the set is brought from the cold outdoors into a warm room, or if it is in a cold  
room to a room which is heated, or in the summer, if the set is moved from an air-  
conditioned room or car to a hot or humid location.  
Should condensation occur, the set may not operate properly. Open the CD DOOR  
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding  
temperature) before using the set.  
 
13  
IMPORTANT REQUIREMENT BY THE FCC  
Since the CD circuitry may cause interference to other radios nearby, switch this  
set off when not in use or move it away from the affected radios.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesirable operation.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
SAFETY CERTIFICATION  
This Compact Disc Player is made and tested to meet safety standards of the FCC  
requirements and comply with safety performance of the U.S. Department of Health  
and Human Services, and also with FDA Radiation Performance Standards 21 CFR  
Subchapter J.  
WARNING  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
Unauthorized recording of copyrighted material may violate laws. Do not copy songs  
without permission of the copyright holder.  
LASER SAFETY  
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,  
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.  
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN  
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM  
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR  
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER  
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD  
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS  
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.  
 
TROUBLE SHOOTING GUIDE  
14  
Causes  
Symptoms  
Solutions  
Batteries are weak (they Replace both batteries with fresh  
may test OK on tester but alkaline batteries. Battery life with fresh  
they are weak for CD batteries is above 8 hours (rechargeable  
Tracks do not  
change or set  
does not play  
normally.  
operation).  
batteries have 1/2 of that life).  
Dead or weak batteries.  
Replace both batteries with fresh ones.  
Check AC Adaptor connection at AC  
outlet and the right side of set.  
CD Player will not  
turn on.  
AC Adaptor not  
connected properly.  
Disc inserted incorrectly.  
Defective compact disc.  
CD DOOR not closed.  
Re-insert disc with label side facing up.  
Try another compact disc.  
Close the door securely.  
Disc will not play.  
Take out the CD and leave the CD  
DOOR open for about 20 minutes to  
dry the moisture condensation.  
Re-insert headphone plug into  
PHONES jack (not AUX OUT).  
Moisture has formed  
inside the CD deck.  
Headphone plug not  
inserted properly.  
Increase the volume.  
VOLUME control set to  
minimum.  
No sound from  
headphones.  
Replace with fresh batteries or use AC  
Adaptor.  
Weak batteries.  
Try another compact disc.  
Defective compact disc.  
Plug headphones into PHONES jack.  
(NOT THE AUX OUT JACK)  
Headphones plugged into  
AUX OUT jack.  
VOLUME control  
has no function.  
The compact disc or  
lens is dirty or CD is  
scratched.  
Clean or replace the compact disc or  
clean the lens.  
Sound is skipping  
or sound stops.  
Press the ESP+ button to start the ESP  
PlusTM function, or place the player on  
a stable level.  
Strong vibrations.  
Music is too loud.  
Lower the VOLUME control.  
Sound is distorted.  
BASS BOOST is ON.  
Slide BASS BOOST switch to OFF.  
Replace both batteries or use AC Adaptor.  
Weak batteries.  
Remove batteries and Adaptor. Wait  
15 seconds and re-insert. Make sure  
batteries are fresh or Adaptor has  
power.  
Electronic or static error  
caused circuitry to lock.  
Buttons do not  
work.  
Press the REVERSE button on your  
cassette player or reverse the  
adaptor.  
Car Cassette  
Adaptor ejects  
from radio.  
Your car may have special  
cassette player.  
Cigarette Lighter  
Adaptor has no  
power or Cigarette  
Lighter Indicator  
does not light up.  
Insert Adaptor firmly and fully (make  
sure socket is clean).  
Poor contact.  
Unscrew Adaptor tip and replace fuse  
inside the Adaptor. Also check the  
Car’s fuse.  
Fuse is blown.  
 
15  
TECHNICAL SPECIFICATIONS  
CD Player Section  
Frequency response .............................. 50Hz - 15kHz (+1/-2 dB)  
Wow and flutter ...................................... Below measurable limits  
Sampling frequency ................................ 44.1KHz  
D/A converter ......................................... 1-bit  
Error correction method .......................... CIRC  
Pickup ................................................... Optical 3-beam semiconductor laser  
(780 nm wavelength)  
Laser diode material GaAIAs  
Laser output less than 44.6µw  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
This set will not play CDRW encoded discs.  
General  
Maximum output (stereo headphones) .....  
Power Supply  
20mW + 20mW  
AC adaptor ...........................................  
DC .......................................................  
120V/60Hz  
3V: Using 2 size “AA” batteries  
Set Dimensions (approximate)  
Width ...............................................  
Depth ..............................................  
Height ..............................................  
Weight (approximate) ...........................  
5 1/4"  
6"  
1 1/8"  
9.5oz. (270g) (set only)  
Because the products are subject to continuous improvement, Lenoxx reserves the  
right to modify product designs and specifications without notice and without incurring any  
obligation.  
For customer service Dial 1-800-315-5885  
(MONDAY - THURSDAY 09:00 AM - 5:00 PM, FRIDAY 09:00 AM - 1:00 PM EST)  
© 2000 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
 

LaCie Network Card 400USB User Manual
Land Pride Lawn Mower ZXT54 Series User Manual
Lennox Hearth Indoor Fireplace SYM 35N User Manual
LevelOne Network Card WNC 0301 User Manual
LG Electronics Flat Panel Television 206 4071 User Manual
Lincoln Electric Welder 11124 User Manual
Magnadyne Security Camera MCS 700BW User Manual
Magnavox Blu ray Player MBP512OF F7 User Manual
Makita Saw 5008MG User Manual
Maytag Clothes Dryer MEDX600XW User Manual